Snmp Community Table Configuration - D-Link xStack DES-3800 Series User Manual

Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Security Level
To implement your new settings, click Apply. To return to the SNMP Group Table, click the
Entries link.

SNMP Community Table Configuration

Use this table to create an SNMP community string to define the relationship between the SNMP manager and an agent. The
community string acts like a password to permit access to the agent on the Switch. One or more of the following characteristics
can be associated with the community string:
An Access List of IP addresses of SNMP managers that are permitted to use the community string to gain access to the
•
Switch's SNMP agent.
Any MIB view that defines the subset of all MIB objects will be accessible to the SNMP community.
•
Read/write or read-only level permission for the MIB objects accessible to the SNMP community.
•
To configure SNMP Community entries, open the SNMP Manager folder, (located in the Administration folder) and click the
SNMP Community Table link, which will open the following window:
The following parameters can set:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Description
Type an alphanumeric string of up to 32 characters. This is used to identify the new SNMP
group of SNMP users.
This name is used to specify the SNMP group created can request SNMP messages.
Specify a SNMP group name for users that are allowed SNMP write privileges to the Switch's
SNMP agent.
Specify a SNMP group name for users that can receive SNMP trap messages generated by
the Switch's SNMP agent.
SNMPv1 - Specifies that SNMP version 1 will be used.
SNMPv2 - Specifies that SNMP version 2c will be used. The SNMPv2 supports both
centralized and distributed network management strategies. It includes improvements in the
Structure of Management Information (SMI) and adds some security features.
SNMPv3 - Specifies that the SNMP version 3 will be used. SNMPv3 provides secure access
to devices through a combination of authentication and encrypting packets over the network.
The Security Level settings only apply to SNMPv3.
NoAuthNoPriv - Specifies that there will be no authorization and no encryption of packets sent
between the Switch and a remote SNMP manager.
AuthNoPriv - Specifies that authorization will be required, but there will be no encryption of
packets sent between the Switch and a remote SNMP manager.
AuthPriv - Specifies that authorization will be required, and that packets sent between the
Switch and a remote SNMP manger will be encrypted.
Figure 6- 30. SNMP Community Table Configuration window
59
Show All SNMP Group Table