Network - NeuraLabel 300x User Manual

64 NeuraLabel 300x User Guide

6.3.2 Network

The NeuraLabel 300x will work on your corporate or private network, using either a static
or dynamic IP address.
Set the network type to Automatic if you wish to use a dynamic IP address. This will use
the DHCP server on your network.
Setup -> Network
Setup->Network->Print Configuration Page
The NeuraLabel 300x requires a network link speed of 100 Mbps, full-duplex operation.
See the Network Installation section for more information.
© 2015 NeuraLabel Printing Solutions, A Neuralog Company