Table of Contents
Advertisement
4.3.2.2 Printer Features
The following sections contain the important driver settings for continuous printing.
4.3.2.2.1 Print in Max DPI
The Print in Max DPI driver setting is found in the Advanced Options Dialog of the
NeuraLabel Printer Driver.
Printing in Max DPI can increase the quality of the print, however it is not advised or
available for all media types. Print in Max DPI is only available for Photo Inkjet Papers
and Glossy Labels, because only these papers are designed to properly handle the
increased amount of ink. It can be used with Draft, Normal or Best modes. It can also be
used to increase image accuracy with the selected ink level mode.
Many types of label media will have a higher quality appearance with less ink and lower
DPI settings. Print in Max DPI setting of No is recommended for most continuous form
label printing.
4.3.2.2.2 Image Enhancement
The Image Enhancement driver setting is found in the Advanced Options Dialog of
the NeuraLabel Printer Driver.
Image Enhancements is Off by default. It may be useful for printing labels that include
photographs. Image Enhancement is known to provide excellent skin tone colors and
true-to-life landscape colors through automated photo brightening, adaptive lighting, and
image sharpness and smoothness control.
4.3.2.2.3 Borderless Printing
The Borderless Printing driver setting is found in the Advanced Options Dialog of the
NeuraLabel Printer Driver.
Borderless Printing has values of ON and OFF.
If your media does not have marks, you can use borderless printing. Borderless label
printing is not usually used with marked media.
4.3.2.2.3.1 Borderless Printing ON
Borderless Printing is done on media without marks. Be sure to select "No
Marks" in the "Use Marks" setting. Borderless Printing is used to remove the top and
bottom margins from the print. It does not remove left or right margins. Borderless
Printing is usually used when the printer is being used as a web press. It can be used to
print documents whose pages need to be "stitched" together. Or it can be used to print
borderless individual labels with a gap between each label.
Borderless label printing should only be used on unmarked media using the "No Marks"
setting. For printing continuous label media with marks, such as pre-die cut label media,
set Borderless Printing to Off.
© 2015 NeuraLabel Printing Solutions, A Neuralog Company
Label Printing Options
43
Advertisement
Table of Contents
