Table of Contents
Advertisement
NOTE: If your media has perforated or separate die cut label pages, but does not have
marks, you cannot expect reliable results. Contact Neuralog for help obtaining the
correct media for use with the 300x printer.
4.3.2.2.9 Rotate 180
The Rotate 180 driver setting is found in the Advanced Options Dialog of the
NeuraLabel Printer Driver.
Rotate 180 will simply rotate each individual page as it is printed. This setting is
available for use with the Borderless Printing setting at OFF. Rotation of borderless
labels is not supported.
Rotate 180 is often needed to orient labels correctly for use with unwinder and rewinder
units.
4.3.2.2.10 Print Head Adjust
The Print Head Adjust driver setting is found in the Advanced Options Dialog of the
NeuraLabel Printer Driver.
Print Head Adjust affects the distance between the print head and the media. Because
label media is normally thicker than plain paper, the print head may best be positioned
farther away from the media. The value of Auto will automatically detect the best position
for the print head, given the selected Media Type.
Print Head Adjust Settings:
Low - Gives the best image quality but has the highest smear risk. Use only on very
flat, thin media.
Medium - Recommended for most media and best overall tradeoff.
High - Use only for very thick media such as envelops.
Auto - Selects a printhead height depending on Media selection in the Paper/Quality
tab of the driver.
The following table summarizes the Auto Printhead Setting, based on the selected
media type.
© 2015 NeuraLabel Printing Solutions, A Neuralog Company
Label Printing Options
49
Advertisement
Table of Contents
