Table of Contents
Advertisement
Reasons for Inserting Leading Blank Pages:
Rolled Media/Web Press - If you are placing the printed media on a roll, you may
wish to use a leading blank page or two to attach the media to the rewinder device.
Shorter media may need a larger number of blank pages to achieve the same result.
Job Separation - You may choose to include one or more blank media pages in
between print jobs to separate them.
Note that the printer may automatically place an additional page before or after each job
for excess ink. You may see an ink pattern similar to the one shown below. This is
necessary to keep the ink heads in working order.
4.3.2.2.12 Trailing Blank Pages
The Trailing Blank Pages driver setting is found in the Advanced Options Dialog of
the NeuraLabel Printer Driver.
Trailing Blank Pages allows you to add blank pages into the end of the job. You may
add 0 to 20 trailing blank form pages to the end of the print job.
Reasons for Inserting Trailing Blank Pages:
Rolled Media/Web Press - If you are placing the printed media on a rewinder, you
may wish to use a trailing blank page or two so that the outer printed labels are
protected. Shorter media may need a larger number of blank pages to achieve the
same result.
Job Separation - You may choose to include one or more blank media pages in
between print jobs to separate them.
Ending Job Outside Printer - Adding one or two trailing blank pages will allow your
print job to be completely out of the printer at the end of the print. This is more
convenient for tearing off a completed print job. (With no trailing pages, the end of the
© 2015 NeuraLabel Printing Solutions, A Neuralog Company
Figure: Printhead Maintenance Pattern
Label Printing Options
51
Advertisement
Table of Contents
