Table of Contents
Advertisement
4.3.2.2.3.2 Borderless Printing OFF
Bordered Printing (where Borderless Printing is set to OFF) can be done on marked
or unmarked media. The marked media can be on a roll or fanfold. As with Borderless
printing, copies or counted labels can be made.
Bordered Copies
Bordered copies can be made on marked or unmarked media. The pages will be evenly
spaced using the exact label size.
Bordered Pages (not
copies)
Bordered pages can be made on marked or unmarked media. The pages will be evenly
spaced using the exact label size.
If using marked media, make sure the perf-to-perf measurement of the label media
exactly matches the defined label page size.
Note that the Mark Adjust setting can be used to center the label on the page in the
continuous direction.
4.3.2.2.4 Borderless Copies
The Borderless Copies driver setting is found in the Advanced Options Dialog of the
NeuraLabel Printer Driver.
Borderless Copies can be printed on the NeuraLabel 300x. There are two
configurations.
Normal prints the copies at the fastest possible speed. A gap may appear between
label copies because each label copy may be placed on a slightly larger "even" page
boundary. However each label itself is printed full bleed or borderless.
Enhanced Precision prints the copies butted up against one another, creating a
completely seamless print. The individual labels are full bleed or borderless. However,
print speed may be slower.
NOTE: Borderless Copies can only be printed using the "No Marks" setting.
© 2015 NeuraLabel Printing Solutions, A Neuralog Company
Label Printing Options
45
Advertisement
Table of Contents
