2.2
LED Identification
This section provides an overview of the front and rear LEDs.
2.2.1 Front LEDs
LED
System LED
Power 1 LED
Power 2 LED
Fan LED
100G QSFP28
slots
Four LEDs /
port
AG9064 Spine Switch
Upper QSFP28 Port LED
Lower QSFP28 Port LED
Description
Off – Power is off
•
Solid Green – Normal operation
•
Blinking Green – Booting
•
Solid Amber – BMC hang, I/O port module fault
•
Solid Red – CPU hang, System over current, System over voltage
•
Solid Green – Power Supply 1 is supplied to the switch & operating normally
•
Solid Red – Power Supply 1 is failed
•
Off – Power is disconnected
•
Solid Green – Power Supply 2 is supplied to the switch & operating normally
•
Solid Red – Power Supply 2 is failed
•
Off – Power is disconnected
•
Solid Green – FAN operating normally
•
Solid Red – FAN is failed
•
LED1 (Solid Lighting – Linkup; Blinking – Activity)
Solid Green – 100G Operation
•
Solid White – 50G Operation
•
Solid Amber – 40G Operation
•
Solid Blue – 25G Operation
•
Solid Purple – 10G Operation
•
Off – No Link
•
(Figure 2-3: Front LED Identification)
4
Power 1 LED
Power 2 LED
Fan LED
System LED