Led Identification - Delta AG9032 Installation Manual

2.2

LED Identification

This section provides an overview of the front and rear LEDs.
2.2.1 Front LEDs
LED Description
•
•
System LED
•
•
•
Power 1 LED
•
•
•
Power 2 LED
•
•
•
Fan LED
•
LED1
•
•
•
100G QSFP28
•
slots
•
(Four LEDs
per port)
LED 2-4 (working in breakout)
•
•
•
Upper QSFP28 Port LED
Lower QSFP28 Port LED
(Figure 2-3: Front LED Identification)
Off – Power is off
Solid Green – Normal operation
Blinking Green – Booting
Solid Red – Critical Alarm
Solid Green – Power Supply 1 is supplied to the switch & operating normally
Blinking Amber – Power Supply 1 is failed
Off – Power is disconnected
Solid Green – Power Supply 2 is supplied to the switch & operating normally
Blinking Amber – Power Supply 2 is failed
Off – Power is disconnected
Solid Green – FAN operating normally
Solid Amber – A FAN is failed
Off – No link
Solid Green – A valid 100Gbps link (4x25G)
Solid Amber – A valid 40Gbps link (4x10G)
Solid Blue – A valid 25Gbps link
Solid Purple – A valid 10Gbps link
Off – 40/100G operation (assuming LED1 is illuminated) or No link
Solid Blue – A valid 25Gbps link
Solid Purple – A valid 10Gbps link
Chapter 2
Power 1 LED
Power 2 LED
System LED
Fan LED
4
• Appearance and Mechanism