JDS Uniphase SmartClass E1 User Manual page 122

Hide thumbs Also See for SmartClass E1:
Table of Contents

Advertisement

Chapter 8 Maintaining the Batteries
Replacing the batteries
106
3 Using a slotted screwdriver, remove the screw from the battery compart-
ment door, and then press down and push the panel toward the bottom
end.
4 Replace the batteries, with polarities oriented as shown in
+
+
+
+
Figure 12 Battery orientation
We recommend Energizer
5 Replace the battery compartment door, and secure the door by tightening
the screw.
6 Reconnect the AC adapter to the unit and to an AC power supply.
7 Turn the unit ON, and then specify the type of battery you inserted.
The batteries are replaced.
SmartClass E1 Tester User's Guide
®
2500 mAh rechargeable batteries.
Figure
12.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smartclass e1/datacom

Table of Contents