Frame Data Results; Timeslot Results; Bert Results - JDS Uniphase SmartClass E1 User Manual

Frame Data results

Timeslot results

BERT results

Table 12 Interface test results (Continued)
Result
MFAS Word Error Rate
MFAS Sync Losses
The Frame Data category lists results related to framing.
the results that appear in the Frame Data category.
Table 13 Frame Data results
Result
FAS Word
NFAS Word
MFAS Word
NMFAS Word
Si Bit
A Bit
Sa 4
Sa 5
Sa 6
Sa 7
Sa 8
The timeslot category lists the current bits, and signaling bits where applicable,
for each timeslot.
The BERT category lists results related to the bit error rate test pattern.
Table 14 describes the results that appear in the BERT category.
Table 14 Test (BERT) results
Result
TSE
Bit Error Rate
Block Errors
Pattern Slips
Pattern Slip Seconds
SmartClass E1 Tester User's Guide
Description
Ratio of errored MFAS words to the total number of
frames received
Number of times MFAS Sync was lost
Description
The current Frame Alignment Signal word
The current Non Frame Alignment Signal word
The current Multi Frame Alignment Signal word
The current Non Multi Frame Alignment Signal word
The current Si Bit setting
The current A Bit setting
The value of the Sa 4 bit over the previous 8 received
frames
The value of the Sa 5 bit over the previous 8 received
frames
The value of the Sa 6 bit over the previous 8 received
frames
The value of the Sa 7 bit over the previous 8 received
frames
The value of the Sa 8 bit over the previous 8 received
frames
Description
Test Sequence Error (bit error)
Ratio of bit errors (TSEs) to received pattern data bits
Number of blocks containing one or more errored bits.
Number of pattern slips detected since start of test
(PRBS patterns only)
Number of seconds during which one or more pattern
slips occurred after initial pattern synchronization.
Chapter 7 Test Results
E1 Results
Table 13 describes
81