Rear Panel - Dahua Villa VTO Quick Start Manual

No. Name
4 Speaker
5 User directory
6 Call key

1.3.2 Rear Panel

No. Name
Camera
1 adjusting
column
2 Tamper switch
3 Network port
4 User port
5 Debugging port
Description
Audio output.
Set user info.
Call management center or VTH.
Table 1-6
Figure 1-12
Description
angle
Adjust camera angle.
When VTO is detached from the wall forcibly, give out alarm sound
and report alarm info to management center.
Connect network cable (RJ45 plug) with adapter cable.
Provide power port, lock port, door sensor feedback port and exit
button port to connect power supply, electric control lock, solenoid
lock and exit button. Wiring method is shown in Figure 1-13 and
Figure 1-14.
It is used by engineering personnel during debugging.
Table 1-7
7