Connect The Keyboard To The Vr150 Monochrome Monitor - Digital Equipment VAXstation 2000 Hardware Installation Manual
Hide thumbs
Also See for VAXstation 2000:
- Owner's manual (145 pages) ,
- Network manual (68 pages) ,
- Supplement manual (84 pages)
Table of Contents
Advertisement
Connect the Keyboard to the VR150 Monochrome Monitor
1. Locate the keyboard.
2. Turn the keyboard over and install the keyboard feet (Figure 51).
Installation of the keyboard feet is optional.
Figure 51:
Installing the Keyboard Feet,
VR150 Monochrome
Monitor
KEYBOARD FEET
KEYBOARD
(BOTTOM VIEW)
3. Turn the keyboard right side up.
Caution: Never disconnect or connect the pointing device cable while
the system power is on.
4. Connect the keyboard cable and pointing device cable to the appropriate
video cable assembly (Figure 52 or 53).
VAXstation 2000 Hardware Installation Guide
53
Advertisement
Table of Contents
