Digital Equipment VAXstation 2000 Hardware Installation Manual page 38

Install Video Cable Assembly, VR260 Monochrome Monitor
If you have a VR260 monochrome monitor with a 4-plane graphics
coprocessor to display gray-scale on your screen, you will need to install a
color video cable assembly on your VR260 monitor. Follow the instructions in
the section, VR260 Monochrome Monitor with 4-plane Graphics Coprocessor
to install the color video cable assembly on your monochrome monitor.
VR260 Monochrome Monitor Without 4-plane Graphics Coprocessor
1. Insert the video connector into the socket on the back of the monitor.
Turn the connector clockwise to fasten (Figure 26).
Figure 26: Fastening the Video Connector, VR260 Monochrome
Monitor
COMPOSITE
VIDEO
CONNECTOR
TO SYSTEM
BCI8P
VIDEO CABLE
ASSEMBLY
VAXstation 2000 Hardware Installation Guide 29