Digital Equipment VAXstation 2000 Hardware Installation Manual page 105

VSm8v_QUE_RUsure (DUAx 1/0) ? [x represents the number
chosen. 0 or 1.]
If the disk has not been formatted or a problem occurs with the disk, the
following text appears:
VSmsv.STS.Siz ??
VSmsv_RES_Err #2
84 FAIL
» >
If you see this text and you want to format your disk, format it according
to the instructions in Chapter 1. If the disk is faulty, the formatter
program will not be able to complete the formatting procedure. If this
happens, call your service representative.
4. Type 1 and press RETURN if you want to continue. To stop the verifier,
type anything other than 1. The verifier stops, an error message is
displayed, and the console prompt (»>) is returned. You may start over
with the TEST 71 command or any other command.
The following sample text is displayed after you type 1:
VSm8v_STS_RDing OK
VSmsv^STS.OBBcnt = 14
VSmsv.STS.NBBcnt = 0
VSmsv_RES_Succ
» >
This text verifies that the disk is in good operating condition. However,
if you see the following text, the fixed disk is faulty and may need repair
or replacement.
VSm8v_STS_NBBcnt = X [X indicates any number higher than 50]
Call your service representative.
5. Type BOOT (or BOOT followed by the name of the device that contains
operating system software) at the console prompt and press Return to
return to normal operation.
96 VAXstation 2000 Hardware Installation Guide