Digital Equipment VAXstation 2000 Hardware Installation Manual page 59

VR150 Monochrome Monitor with Gray-scale
1. Locate the shorter knob of the two knobs that comes with the color video
cable.
2. Screw the video cable assembly into the cable mounting plate (Figure 48).
Figure 48: Mounting Video Cable Assembly on VR150 Monitor,
Color Cable
AfmmwMmm'
VIDEO CABLE CABLE MOUNTING
ASSEMBLY PLATE
Caution: Failure to secure the video cable assembly to the cable
mounting plate may strain the cable and may also cause radio
emissions in excess of FCC guidelines.
3. Connect ONLY the G video cable to the video connector on the rear
panel (Figure 49).
4. Push the cable in and turn the connector clockwise to lock it in place.
50 VAXstation 2000 Hardware Installation Guide