Digital Equipment VAXstation 2000 Hardware Installation Manual page 4

VR150 Monochrome Monitor 46
Adjusting Tilt of VR150 Monitor 47
Install Video Cable Assembly, VR150 Monochrome Monitor . . 48
Cormect the Pointing Device to the VR150 Monochrome Monitor 52
Connect the Keyboard to the VR150 Monochrome Monitor ... 53
Install the Options 56
Installing a Printer or Plotter 56
Installation Procedures 56
Extending LA75's DECconnect Office Cable 60
Operation Procedures 61
Installing a Modem 62
Installing an Expansion Box 64
Positioning the Expansion Box 65
Connecting the Tape Drive Cable 67
Connecting the Disk Drive Cable 71
Connect the Power Cords 75
Power Up the Monitor 82
Set the brightness and contrast controls. 82
Power Up the System 83
Power Up and Test the VAXstation 2000 86
Enter the Test Commands 92
The Fixed Disk Verifier 95
Format the Fixed Disk 97
Set the Default Boot Device 101
Set the Default Boot Flags 102
Setting the Default Recovery 103
Connecting ThinWire or Standard Ethernet 104
Where to Go from Here 104
Install the Operating System Software 104
Related Documents 105
IV