1. Site-preparation review
2. Check your shipment
3. Set up the system unit
4. Connect the monitor cable to the system unit
^—| ^
5. Set up the monitor
6. Connect the keyboard to the monitor
7. Connect the pointing device to the monitor
8. Install any options
9. Connect the power cords
10. Power up and test the VAXstation 2000
11. Format any fixed disks
12. Set the default boot device
After all the steps above have been completed, install the networking
hardware and install the operating system software.
Special Notices
The following notices appear throughout this guide:
•
Notes — Contain general or supplemental information about a topic.
•
Cautions — Contain information to prevent damage to equipment.
•
Warnings — Contain information to prevent personal injury.
Conventions Used in This Guide
Convention
Meaning
Bold
Notes, cautions, and warnings are bolded.
User in
put is also bolded.
Italics
Computer terms defined in the Glossary are italicized the first
time the word appears in the text.