Application Examples; Pump Reservoir; Separator On Flooded Evaporator; Intermediate Cooler - Danfoss EKE 347 User Manual

User Guide | Liquid level controller, EKE 347

Application examples

© Danfoss | DCS (ADAP-KOOL®) | 2016-04

Pump reservoir

Modulating control of injection for a more stable liquid level and suction pressure.
Danfoss
80G75_06-2014

Separator on flooded evaporator

Modulating control and the valve's large capacity range ensure a stable level - even under conditions
of quickly changing loads.

Intermediate cooler

The level transmitter's wide measuring range enables it to monitor the liquid at all levels of the
reservoir - and hence to use the signal for safety functions in connection with the max. permissible
level
Danfoss
80G76_06-2014
Receiver / condenser
The control system's short reaction time makes it very suited for high-pressure float systems with
small refrigerant charges.
EKE 347
AKS 4100/
AKS 4100U
EKE 347
ICM with
ICAD motor
AKS 4100/
AKS 4100U
EKE 347
AKS 4100/
AKS 4100U
EKE 347
AKS 4100/
AKS 4100U
System configuration ICAD
Regulating principle: Low
Level Signal setup: AKS 4100/U
System configuration AKV/A
Regulating principle: Low
Level Signal setup: AKS 4100/U
System configuration AKV/A
Regulating principle: Low
Level Signal setup: AKS 4100/U
System configuration AKV/A
Regulating principle: High
Level Signal setup: AKS 4100/U
DKRCI.PD.RP0.A4.02 | 3