Speakers - HP ENVY x360 15 Maintenance And Service Manual

Speakers

Description
Speakers (include left and right speakers, cables, and two rubber isolators)
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Disconnt the webcam cable (2) and the display panel cable (3) from the system board, and then release
cables from the retention clips and routing channels built into the speakers.
3. Remove the two Phillips M2.0×6.3 screws (4) that secure the speakers to the keyboard/top cover.
Bottom cover on page
Battery on page 29).
27).
Component replacement procedures
Spare part number
L20112-001
43