Customizing Remote Hp Pc Hardware Diagnostics Uefi Settings - HP ENVY x360 15 Maintenance And Service Manual

Customizing Remote HP PC Hardware Diagnostics UEFI settings

Using the Remote HP PC Hardware Diagnostics setting in Computer Setup (BIOS), the following customizations
can be performed:
Set a schedule for running diagnostics unattended. Diagnostics can also be started immediately in
●
interactive mode by selecting Execute Remote HP PC Hardware Diagnostics.
Set the location for downloading the diagnostic tools. This feature provides access to the tools from the HP
●
website or from a server that has been preconfigured for use. The computer does not require the
traditional local storage (such as a disk drive or USB flash drive) to run remote diagnostics.
● Set a location for storing the test results. The user name and password settings to be used for uploads can
also be set.
● Display status information about the diagnostics run previously.
To customize Remote HP PC Hardware Diagnostics UEFI settings, follow these steps:
1. Turn on or restart the computer, and when the HP logo appears, press
2. Select Advanced, and then select Settings.
3. Make customization selections.
4. Select Main, and then Save Changes and Exit to save settings.
System changes take effect when the computer restarts.
62 Chapter 7 Using HP PC Hardware Diagnostics
f10 to enter Computer Setup.