HP ENVY x360 15 Maintenance And Service Manual page 59

NOTE: The thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and
the system board components each time the fan/heat sink assembly is removed. Replacement thermal material
is included with the fan/heat sink assembly and system board spare part kits.
Computer model equipped with a graphics subsystem with discrete memory: Thermal paste is used on
the processor (1) and the fan/heat sink assembly section (2) that services it. Thermal paste is also used on
the VGA component (3) and the fan/heat sink assembly section (4) that services it.
Computer model equipped with a graphics subsystem with UMA memory: Thermal paste is used on
the processor (1) and the fan/heat sink assembly section (2) that services it.
Reverse this procedure to install the fan/heat sink assembly.
Component replacement procedures 51