Omron 3G8F7-CRM21 User Manual page 98

Communications Control API
Argument
Returned value
Remarks
78
Type Parameter
HANDLE Handle
CPNT_SOFT *SoftwareTable IN
WARE_TABLE
WORD DataRate
It returns TRUE when the function succeeds.
It returns FALSE when an error occurs. The error details can be obtained with
the function GetLastError.
This function is used to start the communications cycles.
The function cannot be executed while the communications cycles are
running.
CPNT_SOFTWARE_TABLE structure
Type Parameter
WORD OutNode
WORD InNode
WORD BitOutNode
WORD BitInNode
Direction
IN Device handle obtained with the
function CPNT_Open
Specify the number of occupied
nodes.
IN Specify the data rate.
0: 4 Mbps
1: 3 Mbps
2: 1.5 Mbps
3: 93.75 kbps
Description
Specify the maximum number of occupied Word
OUT Slave Units.
Settable range: 0 to 64
Specified the maximum number of occupied Word
IN Slave Units.
Settable range: 0 to 64
Specified the maximum number of occupied Bit
OUT Slave Units.
Settable range: 0 to 128
Specified the maximum number of occupied Bit IN
Slave Units.
Settable range: 0 to 128
Section A-3
Description