Omron 3G8F7-CRM21 User Manual page 203

Preparing and Mounting Flat Connectors on the Cables
Note
2. Setting the Cable Stopper
Close the cover of the Flat Connector I Socket. Secure the hook. Press down
the cable stopper until it clicks into place and does not return.
3. Attaching the Cable
Confirm that the cable wire colors match the cable label colors on the Flat
Connector I Socket. Insert the tips of the cable wires all the way into the cable
stopper in the cover.
4. Attaching the Housing
Reconfirm that the cable wire colors match the cable label colors. Temporarily
secure the housing to the cover.
Housing
Once it is attached, the housing cannot be removed from the cover. If you
attempt to remove it forcibly, you may damage the connector.
Cable stopper
Location of
cable stopper
Section E-4
183