Omron 3G8F7-CRM21 User Manual page 160

Shared Memory Area Specifications
Network Parameter
140
I/O size information format
Bit Flag
0 to 4 Number of IN
channels (points)
5 IN-setting enabled
flag
6 to 7 Reserved area
8 to 12 Number of OUT
channels
13 Out-setting enabled
flag
14 Reserved area
15 Slave Unit Enabled
flag
This is the network setting for the CompoNet Master Board.
Normally, no setting is required. It is set when the network parameter is
enabled. The command is used to make the setting.
Data format
Offset address: 0x4692
Offset
(Word)
15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
+0
+1 Monitoring time of event addressed to Slave Units
+2 to +4
Description
Set the number of IN channels of Slave Units.
Set the Bits 0 to 5 to 0 (OFF), when the number of IN
channels is zero.
=00000: 2 points, =00001: 4 points,
=00010: 8 points, =00011: 16 points,
=00100: 32 points, =00101: 48 points,
=00110: 64 points, =00111: 80 points,
=01000: 96 points, =01001: 112 points,
=01010: 128 points, =01011: 144 points,
=01100: 160 points, =01101: 176 points,
=01110: 192 points, =01111: 208 points,
=10000: 224 points, =10001: 240 points,
=10010: 256 points, others: prohibited
0: Disabled IN number setting
1: Enabled IN number setting
Set 0 (OFF).
Set the number of OUT channels for Slave Units.
Set the Bits 8 to 13 to 0 (OFF), when the number of
OUT channels is zero.
=00000: 2 points, =00001: 4 points,
=00010: 8 points, =00011: 16 points,
=00100: 32 points, =00101: 48 points,
=00110: 64 points, =00111: 80 points,
=01000: 96 points, =01001: 112 points,
=01010: 128 points, =01011: 144 points,
=01100: 160 points, =01101: 176 points,
=01110: 192 points, =01111: 208 points,
=10000: 224 points, =10001: 240 points,
=10010: 256 points, others: prohibited
0: Disabled OUT number setting
1: Enabled OUT number setting
Don't care
Enable the relevant flag when a Slave Unit is
registered.
0: The "All" setting is invalid. (No Slave Unit is
registered.)
1: The "All" setting is valid. (The Slave is registered.)
Bit
Event function enabling
Reserved
Section B-3