Omron 3G8F7-CRM21 User Manual page 100

Communications Control API
80
Bit Flag
9 Logical error
checking item flag
10 Network parameter
function flag
11 Slave Unit parameter
function flag
12 to Reserved area
15
CPNT_SOFTWARE_TABLE structure
Type Parameter
WORD OutNode
WORD InNode
WORD BitOutNode
WORD BitInNode
CPNT_EX_TABLE structure
Type Parameter
CPNT_REGIS RegTable
T_TABLE
WORD LogicalCheck
CPNT_NET_P NetParam
ARAM
CPNT_SLAVE SlaveParam
_PARAM
Description
0 (OFF): Disabled
1 (ON): Enabled
This is used to set the items to be checked when a
Slave Unit re-participates after a communications
error.
When it is enabled, set the necessary data to the
structure CPNT_EX_TABLE. When it is disabled, all
items are checked.
0 (OFF): Disabled
1 (ON): Enabled
This is the network setting for CompoNet Master
Board. When it is enabled, set the necessary data to
the structure CPNT_EX_TABLE.
0 (OFF): Disabled
1 (ON): Enabled
This is used to set the notification to a Slave Unit,
when it participates. When it is enabled, set the
necessary data to the structure CPNT_EX_TABLE.
Always set 0 (OFF).
Description
Specify the maximum number of occupied Word
OUT Slave Units.
Settable range: 0 to 64
Specify the maximum number of occupied Word IN
Slave Units.
Settable range: 0 to 64
Specify the maximum number of occupied Bit OUT
Slave Units.
Settable range: 0 to 128
Specify the maximum number of occupied Bit IN
Slave Units.
Settable range: 0 to 128
Description
Set it when the Registration table function is
enabled.
Set it when the Logical error checking item flag is
enabled.
Set it when the Network parameter function flag is
enabled.
Set it when the Slave Unit parameter function flag is
enabled.
Section A-3