Keyboard/Mouse - Black Box ServLink ACR3500A Manual

5.2.2 K /M
EYBOARD
When you select the "Keyboard/Mouse" tab, you'll see the dialog box shown in
Figure 5-5.
Figure 5-5. Host Mode Properties: Keyboard/Mouse.
• Click the "Enable Keyboard" checkbox to enable or disable your keyboard.
• Click the "Enable Mouse" checkbox to enable or disable your mouse.
• The "Turbo Mode" feature is not enabled on current versions of the
ServLINK. Leave this checkbox empty (OFF).
• Click "Slow," "Medium," or "Fast" to set the "Pointer Speed" (the speed of the
ServLINK's crosshair mouse cursor). For best mouse control, set this to "Fast"
and set the speed of the Host PC's mouse to "slow."
• Click the "Reset Keyboard Interface" button to send a keyboard-reset
command to the attached Host PC or KVM switch. This is equivalent to "hot-
plugging" the keyboard. This command will not reset the mouse; however, the
ServLINK does have predefined keyboard macros that will send a mouse reset
to the ServSwitch Multi ("Reset Mouse - ServSwitch") or ServSelect ("Reset
Mouse - ServSelect"); see Section 5.2.3.
CHAPTER 5: Basic Switching and Host-Mode Options
OUSE
43