CHAPTER 3: Installation
3.3 At the Remote Site
To access the ServLINK and your host PCs remotely, your remote location must be
equipped with a PC running pcANYWHERE software and with either a modem (if
you'll be dialing into the ServLINK) or a network card and an IP address on the
same network as the ServLINK (if you'll be controlling it across a LAN). Once you
have these things in place, you can establish a connection to your ServLINK and
begin remote operation. If you're doing this over the phone, make sure that you
know the phone number that you'll need to dial to reach your ServLINK.
For additional information about remote access, see your pcANYWHERE
documentation.
31