Host Mode Properties; Test Pci Card - Black Box ServLink ACR3500A Manual

SERVLINK™

5.2 Host Mode Properties

While you're working with a Host PC in Host Mode, you can click the right [Shift]
key three times to bring up the Host Mode Properties dialog box. This box has
four main buttons: Click "OK" to save any Host Mode settings you change,
"Cancel" to abort any changes you made, "Apply" to observe the effect of the
changes without saving them, or "Menu Mode" to simply quit Host Mode and
return to the ServLINK's Main Menu.
This dialog box is used to control six groups of Host Mode settings, organized
under six tabs. These tabs and their settings are described in the six subsections
that follow.
5.2.1 T PCI C
EST ARD
When you select the "Test PCI Card" tab, you'll see the dialog box shown in
Figure 5-4. If you ever have to contact Black Box regarding problems with your
ServLINK, our technicians might ask you for the list of PCI Card characteristics
shown here, which can be useful for troubleshooting purposes.
If you are having severe video problems, click the "Enable Video Capture"
checkbox OFF. When video capture is disabled, the ServLINK doesn't try to display
video from the Host PC, so that you can work with the ServLINK's screens and
menus without the PC's video making them unwatchable or unusable.
Figure 5-4. Host Mode Properties: Test PCI Card.
42