Attaching Speakers/Headphones Or A; Microphone (Optional); Attaching Devices To Other Ports; Not Recommended) - Black Box ServLink ACR3500A Manual

SERVLINK™
3.1.5 A S
TTACHING
You can attach speakers or headphones and a microphone to the ServLINK if you
want to, although this would only allow the ServLINK to transmit or receive sound
itself—the ServLINK cannot send or receive audio signals to/from the remote site
or to/from the attached PCs.
If you are using speakers or headphones with the ServLINK, plug them into the
jack highlighted yellow and labeled
using a microphone, plug it into the adjacent jack highlighted pink and labeled
Figure 3-7 shows how this works:
Figure 3-7. Attaching speakers and a microphone to the ServLINK.
3.1.6 A D
TTACHING
It is theoretically possible to connect other types of devices to other ports on the
rear of the ServLINK, although we don't recommend doing so because such
connections are unnecessary for the ServLINK's operation:
• You could plug a USB device into the USB Type A port labeled "
• You could attach a parallel printer or a Zip
port highlighted maroon and labeled
• You could attach an auxiliary stereo audio source to the 3.5-mm stereo audio
jack highlighted light blue and labeled
Before you make any of these connections, please call Black Box Tech Support to
discuss your application.
22
/H
PEAKERS EADPHONES OR A
O P
EVICES TO THER
M
ICROPHONE
on the back of the ServLINK. If you're
(O , N
ORTS PTIONAL
drive to the DB25 female parallel
®
.
.
(O )
PTIONAL
To speakers
To microphone
R
OT ECOMMENDED
.
)
USB".