Paper - Lexmark C2240 User Manual

Understanding the printer menus

Paper

Tray Configuration
Menu item
Default Source
Tray [x] (1*)
Multipurpose Feeder
Manual Paper
Manual Envelope
Paper Size/Type
Tray [x]
Multipurpose Feeder
Manual Paper
Manual Envelope
Substitute Size
Off
Statement/A5
Letter/A4
All Listed*
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration
Universal Setup
Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–14.17 inches (8.50*)
76–359.91 mm (216*)
Portrait Height
3–14.17 inches (14*)
76–359.91 mm (356*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the paper source for all print jobs.
Note: The multipurpose feeder is available only in some printer models.
Specify the paper size or paper type loaded in each paper source.
Note: The multipurpose feeder is available only in some printer models.
Set the printer to substitute a specified paper size if the requested size is not
loaded in any paper source.
Notes:
•
Off prompts the user to load the required paper size.
•
Statement/A5 prints an A5‑size document on statement when loading
statement, and statement‑size jobs on A5 paper size when loading A5.
•
Letter/A4 prints an A4‑size document on letter when loading letter, and
letter‑size jobs on A4 paper size when loading A4.
•
All Listed substitutes Letter/A4.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width of the universal paper.
Set the portrait height of the universal paper.
65