Lexmark C2240 User Manual page 72

Understanding the printer menus
Menu item
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address
Autoconfiguration
Off
On*
IPv6
DNS Server Address
IPv6
Manually Assigned IPv6
Address
IPv6
Manually Assigned IPv6 Router
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
Off
On*
PS SmartSwitch
Off
On*
Job Buffering
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
Specify the DNS server address.
Assign the IPv6 address.
Assign the IPv6 address.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Set the printer to switch automatically to PCL emulation when a print job
requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch automatically to PS emulation when a print job requires
it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Temporarily store jobs on the printer hard disk before printing.
Notes:
•
This menu item appears only when a hard disk is installed.
•
This menu item appears only in some printer models.
72