Enabling Magnification Mode; Adjusting The Voice Guidance Speech Rate; Using The Keyboard On The Display; Enabling Spoken Passwords Or Personal Identification Numbers - Lexmark C2240 User Manual

Setting up and using the accessibility features
Gesture
Swipe down then left
Swipe up then down
Enabling Magnification mode
1
From the control panel, press and hold the 5 key until you hear a voice message.
2
Select Magnification mode.
3
Select OK.
For more information on navigating a magnified screen, see
24.

Adjusting the Voice Guidance speech rate

1
From the home screen, select Settings > Device > Accessibility > Speech Rate.
2
Select the speech rate.

Using the keyboard on the display

Do one or more of the following:
•
Drag a finger over the key to announce the character.
•
Lift the finger to enter or type the character in the field.
•
Select Backspace to delete characters.
•
To hear the content in the input field, select Tab, and then select Shift + Tab.
Enabling spoken passwords or personal identification
numbers
1
From the home screen, select Settings > Device > Accessibility > Speak Passwords/PINs.
2
Enable the setting.
Function
•
Cancel a job.
•
Go back to the previous setting.
•
Exit the screen that appears without changing any setting or value.
Repeat a spoken prompt.
"Navigating the screen using gestures" on page
25