Lexmark C2240 User Manual page 126

Troubleshooting
Printer and toner cartridge regions
Region
Worldwide or Undefined region
North America (United States, Canada)
European Economic Area, Western Europe, Nordic countries, Switzerland
Asia Pacific
Latin America
Rest of Europe, Middle East, Africa
Australia, New Zealand
Invalid region
Note: To find the region settings of the printer and toner cartridge, print the print quality test pages.
From the control panel, navigate to: Settings > Troubleshooting > Print Quality Test Pages.
Non‑Lexmark supply
The printer has detected a non‑Lexmark supply or part installed in the printer.
Your Lexmark printer is designed to function best with genuine Lexmark supplies and parts. Use of third-
party supplies or parts may affect the performance, reliability, or life of the printer and its imaging
components.
All life indicators are designed to function with Lexmark supplies and parts and may deliver unpredictable
results if third-party supplies or parts are used. Imaging component usage beyond the intended life may
damage your Lexmark printer or associated components.
Warning—Potential Damage: Use of third-party supplies or parts can affect warranty coverage.
Damage caused by the use of third-party supplies or parts may not be covered by the warranty.
To accept any and all of these risks and to proceed with the use of non-genuine supplies or parts in your
printer, depending on your printer model, from the control panel, press and hold X and #, or X and
simultaneously for 15 seconds.
If you do not want to accept these risks, then remove the third-party supply or part from your printer and
install a genuine Lexmark supply or part. For more information, see
supplies" on page
If the printer does not print after pressing and holding X and #, or X and
then reset the supply usage counter.
1
From the control panel, navigate to:
Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters
For non‑touch‑screen printer models, press
2
Select the part or supply that you want to reset, and then select Start.
95.
"Using genuine Lexmark parts and
, simultaneously for 15 seconds,
to navigate through the settings.
126
Numeric code
0
1
2
3
4
5
6
9
,