Lexmark C2240 User Manual page 54

Understanding the printer menus
Menu item
Device Operations
Safe Mode
Off*
On
Device Operations
Clear Custom Status
Device Operations
Clear all remotely‑installed messages
Device Operations
Automatically Display Error Screens
Off
On*
Device Operations
Enable Optional Parallel Port
Off*
On
Toner patch sensor setup
Calibration frequency preference
Disabled
Fewest color adjustment
Fewer color adjustment
Normal*
Better color accuracy
Best color accuracy
Toner patch sensor setup
Full calibration
Toner patch sensor setup
Print TPS information page
App Configuration
LES Applications
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to operate in a special mode, in which it attempts
to continue offering as much functionality as possible, despite
known issues.
For example, when set to On and the duplex motor is
nonfunctional, the printer performs one‑sided printing for a
two‑sided print job.
Erase user‑defined strings for the Default or Alternate custom
messages.
Erase messages that were remotely installed.
Show existing error messages on the display after the printer
remains inactive on the home screen for a length of time equal
to the Screen Timeout setting.
Enable an optional parallel port.
Note: When set to On, the printer restarts.
Set the printer to put down the correct amount of toner to
maintain color consistency.
Run the full color calibration.
Print a diagnostic page that contains information on toner
patch sensor calibration.
Enable the Lexmark Embedded Solutions (LES) applications.
Notes:
•
This menu item is available only in some printer models.
•
When set to On, this setting does not affect built‑in
applications.
54