Setting The Frequency - Panasonic VF0 Series Instruction Manual

Setting the frequency and forward/reverse run operation with the
● ● ● ●
operation panel
There are two methods for setting the frequency and carrying out forward/
reverse run operation with the operation panel.
· Frequency setting:
· Forward/reverse run operation: "Forward run/reverse run method",

1. Setting the frequency

1) Potentiometer setting method (Parameter P09 set to "0": Factory setting)
2) Digital setting method (Parameter P09 set to "1")
23
Downloaded from www.Manualslib.com
Set with the rotation angle of the frequency setting dial on the panel. The
operation will stop at the Min. position (0V stop: refer to page 73), and
the maximum frequency will be attained at the Max. position.
Press the MODE button on the panel to enter the frequency setting mode
(Fr). Press the SET button, set the frequency to be set with the
button and (down) button, and then press the SET button to enter the
data.
The frequency can be changed by holding down the
(down) button during operation. (Hereafter, this function is called the
MOP function.)
This MOP function cannot be used when parameter P08 is set to "1".
manuals search engine
"Potentiometer setting method",
"Digital setting method"
"Start/ stop, rotation direction mode
setting method"
(up)
(up) button and