2. WIRING
Always confirm that the input power is OFF before starting wiring.
●
Failure to do so could lead to electric shocks or fires.
Always connect the earth.
●
Failure to do so could lead to electric shocks or fires.
Wiring work must be carried out by a qualified technician.
●
Failure to do so could lead to electric shocks or fires.
Always install the unit before wiring.
●
Failure to do so could lead to electric shocks or fire.
Do not connect an AC power supply to the output terminals
●
(U, V, W).
Doing so could lead to injuries or fire.
Confirm that the product's rated voltage and the AC power supply voltage
●
match.
Failure to do so could lead to injuries or fire.
Tighten the terminal screws to the designated tightening torque.
●
Failure to do so could lead to fire.
Downloaded from
www.Manualslib.com
!
!
manuals search engine
ATTENTION
ATTENTION
4