Panasonic VF0 Series Instruction Manual page 39

Note 1) Both the maximum output frequency and base frequency are set to 50Hz as the
Note 2) Take note of the upper frequency clamp (parameter P54) when changing the
V/F CURVE (Parameter P04)
Used to select either the constant or square
torque mode.
Data sett-
ing value
TORQUE BOOST LEVEL (Parameter P05)
Used to select a torque boost level that best fits the load characteristics.
Data setting
range
Downloaded from www.Manualslib.com
factory setting data.
maximum output frequency setting.
Name
For machine
Constant
0
torque mode
applications
Square For fan and pump
1
torque mode applications
0 to 40
(A larger value causes a higher output voltage and stronger boost.)
[Constant torque mode]
100
Boost
level
0
Output
frequency
(Hz)
manuals search engine
[Constant
torque mode]
Remarks
100
0
Output
frequency
(Hz)
[Square torque mode]
100
Boost
level
Base
frequency
[Square
torque mode]
100
0
Base Output
frequency frequency
(Hz) (Hz)
0
Output Base
frequency
frequency
(Hz)
Base
frequency
(Hz)
38