Weight And Footprint - Keiser M7i Installation And Operation Manual

M7i WHEELCHAIR-ACCESSIBLE TOTAL BODY TRAINER

WEIGHT AND FOOTPRINT

Total Weight
M7i Footprint
M7i PLACEMENT
The minimum amount of required free area space around the M7i
is 36 inches (914 mm) on all sides (refer to Figure 1). When M7i
machines are positioned adjacent to each other, the free area may
be shared. Free area space at the rear of the M7i is not required
when the M7i is positioned against a wall.
ASSEMBLY
UNPACKING
Follow Steps 1 - 3 below.
1
To position the M7i at the desired location, carefully tilt the M7i toward the rear until the transport wheels make
contact with the floor and position in a desired location.
NOTE: Carefully remove all parts from the box and check for any damage or missing parts (see "Parts List,"
page 7). If parts are damaged or missing, contact your local dealer, distributor, or Keiser Customer Support by
telephone at 1 559 256 8000.
TOOL REQUIRED
142 lbs (64 kg)
Length 39.4 in (1,000 mm) x Width 28 in (711 mm)
2
5 mm Allen Wrench
36 in (914 mm)
Figure 1. M7i Training Area
3
06
FREE AREA
TRAINING AREA
REAR
36 in (914 mm)
FRONT
28 in (711 mm)