Changing the MFX routing
Applying MFX to an instrument or audio track
fig.11-10.j
Instruments/
Audio Phrase/
Audio Track
1.
Press [EFFECTS].
The EFFECTS screen will appear.
2.
Use CURSOR [
3.
Set the Routing parameter to "AUX1."
4.
Press [MIXER].
The MIXER screen will appear.
5.
Access the MIXER screen for the instrument or audio track to which you want to apply the
effect.
6.
Set the Output parameter to "AUX1" for the part on which you want to use MFX.
The audio of the instrument or audio track will be sent to AUX bus 1, and the effect will be applied.
Applying an effect to the master out
fig.11-10.j
Input
Instruments/
Audio Phrase/
Audio Track
1.
Press [EFFECTS].
The EFFECTS screen will appear.
2.
Use CURSOR [
3.
Set the Routing parameter to "Master."
The effect will be applied to master out.
M-216
MV-8800 Owner's Manual
AUX
MIX
MFX
] [
] to move the cursor to MFX.
MIX
MFX
MASTER OUT
] [
] to move the cursor to MFX.
MASTER OUT