Table of Contents
Advertisement
Automating operations for each C (Control) knob
Playback C (Control) knob operations to control effect parameters
●
Automation only playback the operations of the C1–C3 knobs. It does not directly record the values of the effect
parameters themselves. This means that if different effect parameters are assigned to the C1–C3 knobs when
you play back the automation, the played back result will be different.
1.
Move the current time to the location at which the C knob operations were recorded.
2.
Press [PLAY ( )].
The PLAY indicator will light. The C1–C3 knob operation data recorded on the MIDI track will control the effect
parameters.
3.
Press [STOP ( )] to stop playback.
The PLAY indicator will go dark, and playback will stop.
● About the data recorded on the MIDI track
Data for the C-knob operations is recorded on the current MIDI track as MIDI Control Changes. The following
table shows the recorded C-knob data and the MIDI Control Change numbers that are used.
Knob
C1
C2
C3
M-226
MV-8800 Owner's Manual
MIDI Control Change Number
16 (General 1)
17 (General 2)
18 (General 3)
Advertisement
Table of Contents
