3-Sampling; Making Initial Settings For Sampling - Roland MV-8800 Owner's Manual

Chapter 3
Sampling
Here's how to record (sample) from a connected external mic or synthesizer, and use the sample as an audio source for the
MV-8800's sampler.

Making initial settings for sampling

● To adjust the sensitivity and level of the analog input
●
If you're recording an analog input source, adjust the recording level before sampling.
1.
Press [MIXER].
The MIXER screen will appear.
2.
Press [F4](AUX/Phrs/In).
The MIXER (AUX/FX/AUDIO PHRASE/INPUT) screen (Screen Guide; p. 237) will appear.
3.
Set the Level of IN channel to 100 by using Slider 8.
4.
Input an audio signal to the ANALOG INPUT
The level meter will move.
5.
Adjust the SENS L/R knobs.
Adjust the knobs so that the level meters move as high as possible in the range of -12 dB–0 dB. If the clip
indicators light, the level is too high.
Clip
indicators
-12–0 dB
MIC/LINE (
or ANALOG INPUT PHONO) jacks.
M-83
MV-8800 Owner's Manual
3