Roland MV-8800 Owner's Manual page 153

Production studio
Hide thumbs Also See for MV-8800:
Table of Contents

Advertisement

4.
Press [PLAY ( )].
The REC indicator and PLAY indicator will light, and recording will begin. The Now Time and Play List will
begin changing. Start performing.
You can use the following functions while recording. For details on these functions, refer to the pages listed.
• Track mute/solo (p. 133, p. 134)
• Event erase (p. 154)
During recording, you can temporarily pause recording by pressing [REC (
("rehearsal mode"). In this state, striking the pads will not cause data to be recorded. This is useful when you
want to check the sounds you are using, or when you want to practice.
5.
When you've finished recording, press [STOP ( )].
The REC and PLAY indicators will go dark, and recording will stop. If you want to continue to record, continue
from step 1. If you run out of tracks for recording, add tracks as described in "Adding MIDI tracks for recording
MIDI data" (p. 151).
Correcting the note timing while you record (Input Quantize)
Quantize is a function that automatically aligns the notes of your pad performance to accurate timing intervals.
Here's how you can apply the Quantize function during realtime-recording (Input Quantize).
In addition to the settings described in step 4 of
need to set the following parameter.
For details on other Quantize-related parameters, refer to "RECORDING PARAMETER (MIDI) popup" (Screen
Guide; p. 16).
• Input Quantize Type
This applies quantization to the data you input (perform).
Range
Explanation
Off
Quantize will not be applied; your performance will be recorded exactly as you play it.
Grid
The note timing will be aligned to intervals of the beat you specify. Use this when you want to record
drums or bass with accurate timing.
Shuffle
The timing of backbeats will be adjusted forward or backward, producing a "shuffle" or "swing" feel.
Recording MIDI tracks (instrument or external MIDI sound module)
"Basic procedure for realtime recording" (p. 152)
Grid Quantize
fig.10-06.j
Shuffle Quantize with Rate = 75%
50%
75%
100%
)] to make the indicator blink
, you'll
MV-8800 Owner's Manual
9
M-153

Advertisement

Table of Contents
loading

Table of Contents