Loading Effect Settings From The Hard Disk - Roland MV-8800 Owner's Manual

Loading effect settings from the hard disk

Here's how to assign effect settings that have been saved using the procedure explained in "Saving a current
effect setting to the hard disk" (p. 213) to the effects library.
1.
Press [IMPORT].
The IMPORT screen (Screen Guide; p. 219) will appear.
2.
Use CURSOR [ ] [
".MVC", or ".MVR") that you want to import.
The procedure is the same as in the FILE UTILITY screen (Screen Guide; p. 189). For details, refer to
"Managing files (File Utility)" (p. 243).
3.
Press [F5](Import).
The popup that appears will depend on the effect setting file that you are importing.
Effects type
MFX
Dly/Cho
Reverb
4.
Using the Library parameter, select the effect library number to which you want to assign
the effect settings.
5.
Press [F5](Execute).
The effect settings will be imported into the specified effects library.
] [ ] [ ] to select the effect setting file (file extension ".MVF",
Popup displays
MFX ASSIGN TO LIBRARY popup (Screen Guide; p. 228)
DELAY/CHORUS ASSIGN TO LIBRARY popup (Screen Guide; p. 228)
REVERB ASSIGN TO LIBRARY popup (Screen Guide; p. 228)
M-81
MV-8800 Owner's Manual
2