Roland MV-8800 Owner's Manual page 305

4.
Set the synchronization parameters.
Here you will set parameters to specify how MIDI Clock synchronization will occur. Refer to the table below,
and make the appropriate settings on the MV-8800 and on the externally connected master device (the
sequencer or recorder that is transmitting the synchronization signals). For details on how to make settings on
your master device, refer to its owner's manual.
Parameter Setting on the MV-8800
Sync Mode Slave-MIDI (MIDI)
●
For an explanation of the other parameters, refer to "SYNC screen" (Screen Guide; p. 81).
●
When synchronized as a MIDI Clock slave, "Wait Note" of the Count In setting is not available.
5.
Play back the master device.
Press the PLAY button on the master device; the MV-8800 will begin running in synchronization.
❍ Pattern Mode
1.
Press [PATTERN].
The PATTERN screen (Screen Guide; p. 91) will appear.
2.
Press [MENU].
The MENU popup will appear.
3.
Select Pattern Sync and press [F5](Select).
The PATTERN SYNC screen (Screen Guide; p. 94) will appear.
The rest of the procedure is the same as in Song mode.
Synchronizing the MV-8800 with a connected external sequencer
Settings on the externally connected master device
Set the device so that it will transmit MIDI Clock messages (Master).
M-305
MV-8800 Owner's Manual
19