Table of Contents
Advertisement
Erasing performance data (Erase)
Here's how to erase the selected performance data.
1.
Access the EVENT LIST screen as described in "Event list editing" (p. 181).
2.
Use CURSOR [
●
When you use CURSOR [
transmitted from the MIDI OUT connector.
●
If you want to select more than one event (i.e., a range of events), hold down [SHIFT] while you move the cursor.
3.
Press [F2](Erase).
The selected event will be erased. The erased event is saved in temporary memory. You can use [F4](Paste)
to paste this saved event at the specified location (Moving an event).
Copying performance data (Copy & Paste)
Here's how to copy the selected performance data to the clipboard (a temporary holding area).
1.
Access the EVENT LIST screen as described in "Event list editing" (p. 181).
2.
Use CURSOR [
●
When you use CURSOR [
transmitted from the MIDI OUT connector.
●
If you want to select more than one event (i.e., a range of events), hold down [SHIFT] while you move the cursor.
3.
Press [F3](Copy).
The selected event stored in internal memory will be copied to the internal memory.
4.
Press [F4](Paste).
The PASTE EVENT popup (Screen Guide; p. 26) will appear.
5.
Specifies To parameter (copy-destination time) and then press [F5](Execute).
The copied event will be pasted to the To parameter.
●
If you are not satisfied with the result of executing this command, press [UNDO/REDO] to return to the state
prior to execution (p. 166).
] [
] or the VALUE dial to move to the data you want to erase.
] [
] to move the current time, the note event located at that time will be
] [
] or the VALUE dial to move to the data you want to copy.
] [
] to move the current time, the note event located at that time will be
Editing events individually
MV-8800 Owner's Manual
10
M-183
Advertisement
Table of Contents
