Loading A Patch From The Hard Disk - Roland MV-8800 Owner's Manual

Making a patch settings

Loading a patch from the hard disk

Here's how to load a patch from the hard disk and use it for the current part and the patch library.
●
For additional information, refer also to "Loading the pre-installed patches" (p. 63).
1.
Press [INSTRUMENTS].
The INSTRUMENTS screen (Screen Guide; p. 114) will appear.
2.
Press [MENU].
The MENU popup will appear.
3.
Select "Load Patch" and press [F5](Select).
The LOAD PATCH screen (Screen Guide; p. 150) will appear.
4.
Select the patch that you want to load and press [F5](Load).
The ASSIGN TO PART / LIBRARY popup (Screen Guide; p. 224) will appear.
5.
Select the destination (instruments part and patch library).
If you want to load into only one of these, turn the other setting Off.
6.
Press [F5](Execute).
The patch will loaded into the specified part and library.
M-100
MV-8800 Owner's Manual