Values For The Parameters/Changing Their Settings; Adjusting The Sound's Brightness - Brilliance; Selecting A Sub-Instrument - Sub-Instrument - Roland SOUND Canvas P-55 Owner's Manual

Hide thumbs Also See for SOUND Canvas P-55:

Table of Contents

PART PARAMETERS 2

Part Parameters 2 are used to determine the brightness of the sound for each Part, and allow you to make settings such as those

which determine how volume and timbre changes will be made in response to velocity. In addition, they include all the

parameters related to Sub-Instruments. By adjusting these parameters, you can enhance your expressive capabilities.

m@ Altering Settings for Part Parameters 2 ececcccccccccccccccocccsoocs

Select the Part for which you wish to make' changes

in its parameters. (Refer to p. 15,

"Altering the Settings for Part Parameters 1," if necessary.)

m@ Values for the Parameters/Changing Their Settings

seeecesecccecccces

@ Adjusting the Sound's Brightness — Brilliance

[Acceptable Values] -7 to 0, 0 — 7

—7 to~1

Within this range the sound will be more subdued. The lower the value,

the more sedate the sound becomes.

Normal.

1—7

The sound takes on more brilliance the higher the value is raised.

Press PART «¢ or PART » to adjust the brilliance of the sound.

@ Selecting a Sub-Instrument — Sub-Instrument

For each Part the P-55 allows you to combine (layer) two Instruments. The second

Instrument you add is known as the "Sub-Instrument."

[Acceptable Values] OFF, P01 — P15, E16 — E25, 026 — 032

When set to oF F, no Sub-Instrument will sound.

* Sounds that can be selected for the Sub Instrument are the same as for Instrument.

Table of Contents