Extracting Specific Note Events (Split Notes) - Roland MV-8800 Owner's Manual

Extracting specific note events (Split Notes)

This lets you extract only specific note events from a track, and move them to a specified other track.
For example, if you have an entire drum performance recorded in a single track, you can use this command
to extract just the sname drum notes and place them on a different track.
●
For details on all of the parameters and values of the Split Notes command, refer to "SPLIT NOTES popup"
(Screen Guide; p. 66).
●
You cannot extract data from audio tracks or pattern tracks.
❍ Parameters to specify
• Note Range
Specifies the range of note numbers that will be extracted.
●
If you set the larger value at the left-hand cursor than the value at the right-hand cursor, the SPLIT NOTES
operation will be executed for the note nnumber other than you set at the Note Range parameter.
• Type
Specifies what will happen after the note events are extracted from the original track.
• Send To
Specifies how the extracted note events will be recorded.
●
If you use the Send To "One Track" setting to place the extracted data in a track that already contains data, the
extracted data will be combined with the existing data in the destination track.
●
If you want to separate drum notes into individual tracks, use the Send To "Separate Tracks by Pitch" setting.
• Track
Specifies the track number in which the extracted note events will be places. This parameter is available in
case of the Send To is "One Track."
List of available editing commands
MV-8800 Owner's Manual
10
M-197