Multi Tap Delay - Roland MC-909 Owner's Manual

Multi-Effects List

43: MULTI TAP DELAY

This effect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can also
set the panning and level of each delay sound.
fig.MFX43
L in
Feed Delay 1
back
Delay 3
Multi Tap Delay
Delay 4
Delay 2
R in
Parameter Value
Delay 1–4 0–4000 ms,
note
Pan 1–4 L64–63R
Level 1–4 0–127
Feedback -98– +98 %
#1
HF Damp 200–8000
Hz, BY-
PASS
Low Gain -15– +15 dB
High Gain -15– +15 dB
Balance #2 D100:0W–
D0:100W
Level 0–127
44: REVERSE DELAY
Adds the reverse of the input sound as a delay.
fig.MFX44
L in
D1
Rev. Delay
Feedback 1
Feedback 4
R in
Parameter Value
Threshold 0–127
Delay 1–4 0-2000 ms,
note
Feedback 1 -98– +98 %
#1
Feedback 4
HF Damp 1 200–8000
HF Damp 4 Hz, BY-
PASS
Pan 1–3 L64–63R
Level 1–3 0–127
Balance #2 D100:0W–
D0:100W
Low Gain -15– +15 dB
High Gain -15– +15 dB
Level 0–127
106
(MFX2 only)
Balance D
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Balance D
Description
Adjusts the time until Delays 1–4
are heard.
Stereo location of Delays 1–4
Output level of Delays 1–4
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you don't want to filter
out any the high frequencies, set
this parameter to BYPASS.
Gain of the low frequency range
Gain of the high frequency range
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
(MFX2 only)
2-Band
EQ
1
D2
Delay
2
D3
D4
3
2-Band
EQ
Description
Volume level at which the reverse
delay begins
Adjusts the time until Delays 1–4
are heard.
Adjusts the amount of the delay
sound that's fed back into the effect.
Negative (-) settings invert the phase.
Adjusts the frequency above which
sound fed back to the effect is fil-
tered out. If you do not want to filter
out any high frequencies, set this
parameter to BYPASS.
Stereo location of Delays 1–3 sound
Output level of Delays 1–3 sound
Volume balance between the direct
sound (D) and the effect sound (W)
Gain of the low frequency range
Gain of the high frequency range
Output level
45: SHUFFLE DELAY
Adds a shuffle to the delay sound, giving the sound a bouncy delay
effect with a swing feel.
fig.MFX45
L in
Feedback
Delay
R in
Parameter
Delay #1
Shuffle
Rate
Pan A/B
Level
Balance
Feedback
#2
Accelera-
tion
HF Damp
Low Gain
High Gain
Balance #
L out
Level
R out
(MFX2 only)
Delay A A
B
Delay B
Value Description
0–4000 ms, Adjusts the time until the delay
note sound is heard.
0–100 % Adjusts the ratio (as a percentage)
of the time that elapses before Delay
B sounds relative to the time that
elapses before the Delay A sounds.
When set to 100%, the delay
times are the same.
L64–63R Stereo location of Delay A/B
A100:0B– Volume balance between Delay A
A0:100B and Delay B
-98– +98 % Adjusts the amount of the delay
that's fed back into the effect. Nega-
tive (-) settings invert the phase.
0–15 Adjusts the time over which the De-
lay Time changes from the current
setting to its specified new setting.
200–8000 Adjusts the frequency above which
Hz, BY- sound fed back to the effect is fil-
PASS tered out. If you don't want to filter
out any high frequencies, set this
parameter to BYPASS.
-15– +15 dB Gain of the low frequency range
-15– +15 dB Gain of the high frequency range
D100:0W– Volume balance between the direct
D0:100W sound (D) and the effect sound (W)
0–127 Output level
2-Band
L out
EQ
2-Band
R out
EQ