Roland MC-909 Owner's Manual page 66

Patch Edit
Parameter Value
Porta Start PITCH,
(Portamento Start) NOTE
Portamento Time 0–127
Unison Switch # OFF, ON
Unison Fat Level # 0–127
TMT (Tone Mix Table)
These parameters specify how the tones will be combined, and how they will be played.
Parameter Value
Structure Type 1&2 1–10
(3&4)
Booster 1&2 (3&4) 0, +6, +12, +18 dB
(Booster Gain)
TMT (Tone Mix Table)
On the MC-909, you can specify how each tone will sound in response to pad playing dynamics (velocity). These parameters are collectively
referred to as the TMT (Tone Mix Table) settings.
Level
Lower
Upper
1
L.Fade value U.Fade value
Velocity Control OFF, ON,
(TMT Velocity RANDOM
Control)
66
Description
Portamento begins anew if you press another key during a pitch movement. This setting specifies how
the new portamento starts.
PITCH: The pitch begins changing immediately to the new note's pitch when its key is pressed.
Pitch
C5
D4
C4
press D4 key
press C5 key
press C4 key
NOTE: The pitch begins changing to the new note's pitch only after it has first reached its original pitch
destination.
Pitch
C5
D4
C4
press D4 key
press C5 key
press C4 key
Time over which the next pitch is reached
Switches the detune effect on/off
If this is "ON," the sound of the selected patch will be layered (three notes), producing a fatter sound.
* If this is turned "ON," the Mono/Poly parameter will also be set to "MONO" ([SOLO] will light), and
the selected patch automatically uses single notes.
Strength of the detune effect
Increasing this value will cause the pitch of the layered notes to be raised and lowered farther away
from each other (maximum one octave up and down).
Description
How tones 1 and 2, or 3 and 4, will be combined
If you press [F6 (Zoom Edit)] while this parameter is selected, the screen will show the way
in which the tones are combined. (Press [EXIT] to return to the previous screen.)
B indicates Booster, and R indicates Ring Modulator.
* If you select Type 2–10 and turn off one of the tones, the other tone will use the conventional
configuration of WG/TVF/TVA.
Depth of the booster effect when "Type" is set to 3 or 4
Velocity
Specifies whether velocity data will be used (ON) or ignored (OFF)
If you specify RANDOM, the tones will sound randomly, regardless of velocity data.
Time
Time